If the correct exposure cannot be achieved at the selected aperture, shutter speed will be displayed in red. If the subject is outside the metering range of the camera, the shutter speed display will show "---". To use the shutter speed dial, press the dial lock release and rotate the dial to the desired setting. 0.93 × (0.62× 35mm equiv.) Viewfinder resolution. 2,360,000. Photography features. Minimum shutter speed. 30 sec. Maximum shutter speed. 1/4000 sec. Maximum shutter speed (electronic) Option Description; BKT1 SETTING: Choose the settings used when the drive dial is rotated to BKT1 or BKT2 (BKT SETTING).: BKT2 SETTING; CH HIGH SPEED BURST: Select the frame rate used when the drive dial is rotated to CH (continuous high speed): 14, 11, or 8 fps. Note that 14fps and 11fps are available only with the electronic shutter.: CL LOW SPEED BURST *The shutter speed ranges for continuous mode may differ from those listed here. Movie: 6.2K: 1/8000sec. to 1/24 sec. DCI4K/4K: 1/8000sec. to 1/4 sec. FHD: 1/8000sec. to 1/4 sec. *Cannot choose slower shutter speed than framerate for some settings. Synchronized shutter speed for flash: Mechanical shutter: 1/250sec. or slower: Continuous shooting Use single point for now. What kind of blur? Motion blur is from a shutter speed too low. Just fuzzy might mean you mis-focused. Try leaving ISO on "Auto" with the limit set to 12,800 and the shutter speed set to 1/80. Then ISO will only be grainy if it needs to be. EvNHL.

setting shutter speed fujifilm xt100